310S 304L Stainless Steel Rod Steel Bar
Diverse Shapes and Sizes – Stainless steel rods are available in a wide range of shapes, including round, square, flat, hexagonal, and octagonal forms. This versatility allows them to meet the requirements of different industrial, construction, and decorative applications.
High-Quality Material Composition – Manufactured from stainless steel ingots through hot rolling or forging, these rods offer superior material integrity, ensuring durability, strength, and resistance to deformation under stress.
Wide Range of Stainless Steel Grades – Stainless steel rods are produced in numerous grades, including 201, 202, 301, 304, 304L, 321, 316, 316L, 310S, duplex steel, antibacterial steel, and more. This variety allows selection of the most suitable material for corrosion resistance, mechanical strength, or specialized functional requirements.
Excellent Mechanical and Corrosion Properties – Depending on the selected grade, stainless steel rods exhibit high toughness, plasticity, and corrosion resistance, making them suitable for applications in demanding environments such as chemical processing, marine, automotive, and architectural structures.
Stainless steel rod refers collectively to stainless steel round, square, flat, hexagonal, and octagonal steel. These rods are manufactured from stainless steel ingots through hot rolling or forging. Common grades include 201, 202, 301, 304, 304L, 321, 316, 316L, 310S, 2520, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel, and other specialized materials.
| Product Name | AISI stainless steel bar 301 303 304 310 316 321 409 430 stainless steel bar |
Type | Round Bar |
Surface | Black,bright,rough turned,grinding,centreless Ground etc |
Standard | GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
Diameter | 4-800mm |
Technigue | Hot Rolled,Cold Rolled,Cold Drawn,Forged |
Grade | 200 series: 201,202,202Cu,204Cu, |
Packing | Standard export packaging. Can be packaged according to customer requirements. |
Transportation time | Stock steel/Steel for simple cutting/Small amount of general standard steel: about 5-20 days for easy delivery; Custom steel/bulk steel: about 15-30 days for delivery. Contact us for specific delivery times. |
Stainless steel rod material, application range, introduction to quality management
Material: 304, 304L, 321, 316, 316L, 310S, 630,
Common materials are 201, 202, 301, 304, 303, 316, 316L, 304L, 321, 2520, 1Cr13, 2Cr13, 3Cr13, dual-phase steel, antibacterial steel and other materials! Specifications are expressed in diameter, such as "50", which means round steel with a diameter of 50 mm. Round steel is divided into three types: hot rolled, forged and cold drawn. The size of hot rolled round bar is 5.5-250 mm.
Application range: petroleum, electronics, chemical industry, medicine, textile, food, machinery, construction, nuclear power, aerospace, military and other industries!
3 Series
316L stainless steel bar: 316 stainless steel contains molybdenum and low carbon content, and its resistance to pitting corrosion in marine and chemical industrial environments is much better than 304 stainless steel! (316L low carbon, 316N nitrogen high strength and high strength, 316F stainless steel with high sulfur content, easy to cut stainless steel.
304L stainless steel bar: As a low-carbon 304 steel, in general, the corrosion resistance is similar to 304, but after welding or after stress relief, its resistance to grain boundary corrosion is excellent, and it can also be used without heat treatment. Maintain good corrosion resistance.
304 stainless steel bar: has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, good hot workability such as stamping and bending, and no heat treatment hardening. Uses: tableware, cabinets, boilers, auto parts, medical appliances, building materials, food industry (use temperature -196°C-700°C).
310 stainless steel bar: The main features are: high temperature resistance, generally used in boilers, automobile exhaust pipes. Other properties are general.
303 stainless steel bar: It is easier to cut than 304 by adding a small amount of sulfur and phosphorus, and other properties are similar to 304.
302 stainless steel bar: 302 stainless steel bar is widely used in auto parts, aviation, aerospace hardware tools, chemical industry. Specifically as follows: handicrafts, bearings, slippery, medical equipment, electrical appliances, etc. Features: 302 stainless steel ball belongs to austenitic steel, which is close to 304, but the hardness of 302 is higher, HRC≤28, and has good rust and corrosion resistance.
301 stainless steel bar: good ductility, used for forming products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than 304 stainless steel.
302 stainless steel ball belongs to austenitic steel, which is close to 304, but the hardness of 302 is higher, HRC≤28, and has good rust and corrosion resistance.
Scope of application
Stainless steel rods have broad application prospects and are widely used in hardware kitchenware, shipbuilding, petrochemical, machinery, medicine, food, electricity, energy, construction and decoration, nuclear power, aerospace, military and other industries! Seawater equipment, chemical, dye, paper, oxalic acid, fertilizer and other production equipment; food industry, coastal facilities, ropes, CD rods, bolts, nuts.
FAQ
Q: About the price of the product？
A: Due to the rise and fall of raw material prices, as well as factors such as the national power restriction policy, product prices will also fluctuate. Welcome to contact us to get the latest product price.
Q: Can you arrange shipment?
A: Of course, we have multiple warehouse locations as well as regular forwarders, and can get the best price from most shipping companies. Provide professional transportation services.
Q: How long will the delivery take?
A: Products that are in stock or only need simple processing, generally 5-15 days. If there is no stock, according to the required product quantity and the usual production time of this product, our professional sales staff will give you an approximate delivery time. According to past experience, in most cases, the delivery time will not exceed 45 days.
Q: What services do you provide?
A: 1. Provide samples, including conventional steel products and some customized steel structure products;
2. Support third-party product quality testing and provide various certificates
3. Provide pick-up and drop-off customer inspection service
4. Provide customized steel structure service
5. Provide simple steel processing, such as cutting, drilling, galvanizing, polishing and other services
6. Provide one-stop service, from product production to product transportation.
