< >

Aluminum Ingots

Aluminum ingots, according to the national standard (GB/T 1196-2008), should be called "aluminum ingots for remelting", which are produced by electrolysis of alumina-cryolite. After aluminum ingots enter industrial applications, there are two categories: cast aluminum alloys and deformed aluminum alloys. Aluminum is a silver-white metal with a low density, only 34.61% of iron and 30.33% of copper, so it is also called light metal.

Contact Now WhatsApp

Product Details

Product Introduction

Classification

Aluminum ingots can be divided into three types: aluminum ingots for remelting, high-purity aluminum ingots, and aluminum alloy ingots according to their composition;

Several common aluminum ingots

Aluminum ingot for remelting--15kg, 20kg (≤99.80%Al):

T-shaped aluminum ingot--500kg, 1000kg (≤99.80%Al):

High-purity aluminum ingot--l0kg, 15kg (99.90%~99.999%Al);

Aluminum alloy ingot--10kg, 15kg (Al--Si, Al--Cu, Al--Mg);

Plate ingot - 500 ~ 1000kg (for plate making);

Round ingot - 30 ~ 60kg (for wire drawing).

Aluminum Ingots

Product Details:

±Al Alloy Chemical Composition
Grade	Chemical Composition %
	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Remark	Ti	Other		Al	Remark
	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Remark	Ti	Single	Total	Al	Remark
1A50	0.300	0.300	0.010	0.050	0.050	—	—	0.030	Fe+Si:0.45	—	0.03	—	99.50	LB2
1350	0.100	0.400	0.050	0.010	—	0.010	—	0.050	Ca:0.03,V+Ti:0.02,B:0.05	—	0.03	0.10	99.50	—
1145	Si+Fe:0.55		0.050	0.050	0.050	—	—	0.050	V:0.05	0.030	0.03	—	99.45	—
2A12	0.500	0.500	3.8-4.9	0.30-0.9	1.2-1.8	—	0.010	0.300	Fe+Ni:0.50	0.150	0.05	0.10	margin	LY12
2011	0.400	0.700	5.0-6.0	—	—	—	—	0.300	Bi:0.20-0.60 Pb:0.20-0.6	—	0.05	0.15	margin	—
2214	0.50-1.2	0.300	3.9-5.0	0.40-1.2	0.20-0.8	0.100	—	0.250	③	0.150	0.05	0.15	margin	—
3A21	0.600	0.700	0.200	1.0-1.6	0.050	—	—	0.10④	—	0.150	0.05	0.10	margin	LF21
3103	0.500	0.700	0.100	0.9-1.5	0.300	0.100	—	0.200	Ti+Zr:0.10	—	0.05	0.15	margin	—
3004	0.300	0.700	0.250	1.0-1.5	0.8-1.3	—	—	0.250	—	—	0.05	0.15	margin	—
5A13	0.300	0.300	0.050	0.40-0.8	9.2-10.5	—	0.100	0.200	Be:0.005,Sb:0.004-0.05	0.05-0.15	0.05	0.10	margin	LF13
5019	0.400	0.500	0.100	0.1-0.6	4.5-5.6	0.200	—	0.200	Mn+Cr:0.10-0.6	0.200	0.05	0.15	margin	—
5154A	0.500	0.500	0.100	0.500	3.1-3.9	0.250	—	0.200	①Mn+Cr:0.10-0.50	0.200	0.05	0.15	margin	—
6101	0.30-0.7	0.500	0.100	0.030	0.35-0.8	0.030	—	0.100	B:0.06	—	0.03	0.10	margin	—
6061	0.40-0.8	0.700	0.15-0.40	0.150	0.8-1.2	0.04-0.35	—	0.250	—	0.150	0.05	0.15	margin	LD30
6063	0.20-0.6	0.350	0.100	0.100	0.45-0.9	0.100	—	0.100	—	0.100	0.05	0.15	margin	LD31
7A04	0.500	0.500	1.4-2.0	0.20-0.6	1.8-2.8	0.10-0.25	—	5.0-7.0	—	0.100	0.05	0.10	margin	LC4
7022	0.500	0.500	0.50-1.0	0.10-0.40	2.6-3.7	0.10-0.30	—	4.3-5.2	Zr+Ti:0.20	—	0.05	0.15	margin	—
7075	0.400	0.500	1.2-2.0	0.300	2.1-2.9	0.18-0.28	—	5.1-6.1	⑤	0.200	0.05	0.15	margin	—
8A06	0.550	0.500	0.100	0.100	0.100	—	—	0.100	Fe+Si:1.0	—	0.05	0.15	margin	—
8011	0.50-0.9	0.6-1.0	0.100	0.200	0.050	0.050	—	0.100	—	0.080	0.05	0.15	margin	—

Aluminum alloy ingot:

Aluminum alloy ingots are made of pure aluminum and recycled aluminum, adding other elements, such as: silicon (Si), copper (Cu), magnesium (Mg), iron (Fe)..., to improve the casting, chemical and physical properties of pure aluminum The alloy formulated for the lack of sex.

Aluminum-silicon (Al-Si) alloy, Al-Si alloy has excellent casting properties, such as good fluidity, good air tightness, small shrinkage rate and small heating tendency, and has good mechanical properties, physical properties, corrosion resistance and It has medium machinability and is the type of alloy with the most varieties and widest uses in cast aluminum alloys.

Aluminum ingots are widely used in construction, electric power, packaging, manufacturing automobiles, trains, subways, ships, airplanes, rockets, spaceships and other land, sea and air vehicles, daily consumer goods and other fields. Aluminum ingots can be used to produce aluminum strips, foils, aluminum alloys, and anti-corrosion packaging materials. They can also be used in aluminum alloys, containers, cables, conductive bodies, central alloys, decoration materials, and daily necessities in the chemical industry.

Aluminum Ingots

Custom Made

Various stainless steel structures, carbon steel structures, galvanized steel structures, and aluminum profiles can be produced.

Color-coated coils of various patterns and colors, aluminum profiles, elbows, tees, stainless steel flanges, steel mesh, perforated steel sheets, cold-formed steel sheet piles, hot-rolled steel sheet piles, U/Z/S/L/AS/H types Steel sheet piles, steel strands, prestressed steel strands, 7/2/3/19/37 steel strands, galvanized steel strands, plastic-coated steel strands, carbon steel wires, steel wires, steel bars, grade I steel bars ( 300/420 grade), Ⅱ grade reinforcement (335/455 grade), Ⅲ grade reinforcement (400/540), Ⅳ grade reinforcement (500/630), compression reinforcement, tension reinforcement, erection reinforcement, distribution reinforcement, stirrup Steel bars, deformed steel bars, smooth steel bars, ribbed steel bars, cold-rolled twisted steel bars, universal steel beams (H-beams), welded H-beams, hot-rolled H-beams, T-beams, T-beams for railways, special-shaped welded T-beams, special-shaped heat Rolled equal-sided and equal-thickness T-shaped steel, special-shaped bolted T-shaped steel, H-shaped steel split T-shaped steel, Z-shaped steel, C-shaped steel, channel steel, I-beam, steel beam (Universal Beam), angle steel (angle iron), equilateral angle steel , Unequal angle steel, W-shaped steel, etc.

Rich manufacturing experience, complete production line, support for customizing various steel profiles! Meet customer application needs. Welcome to contact us for customization.

FAQ

Q: About the price of the product

A: Due to the rise and fall of raw material prices, as well as factors such as the national power restriction policy, product prices will also fluctuate. Welcome to contact us to get the latest product price.

Q: Can you arrange shipment?

A: Of course, we have multiple warehouse locations as well as regular forwarders, and can get the best price from most shipping companies. Provide professional transportation services.

Q: How long will the delivery take?

A: Products that are in stock or only need simple processing, generally 5-15 days. If there is no stock, according to the required product quantity and the usual production time of this product, our professional sales staff will give you an approximate delivery time. According to past experience, in most cases, the delivery time will not exceed 45 days.

Q: What services do you provide?

A: 1. Provide samples, including conventional steel products and some customized steel structure products;

2. Support third-party product quality testing and provide various certificates

3. Provide pick-up and drop-off customer inspection service

4. Provide customized steel structure service

5. Provide simple steel processing, such as cutting, drilling, galvanizing, polishing and other services

6. Provide one-stop service, from product production to product transportation.

7. Provide 24 hours online service

Q: Do you provide after-sales service?

A: Yes, our company is committed to reaching long-term and friendly cooperation with customers. If you encounter any problems, please feel free to contact us.

Q: How can I get your quotation as soon as possible?

A: You can contact us through various contact channels on the website, such as: phone number, email, WhatsApp, WeChat, etc. We will reply within one day. When you contact us, you can provide us with the product specifications you need, such as size, quantity, material, drawings and other information. In this way, we will be able to provide you with the most accurate product quotation immediately.

Leave your messages